DUV 11.3
The DUV11.3 UV monitor offers a cost-effective way of recording UV irradiance. The device is designed for panel mounting. It is operated using pushbuttons on the front panel.
Data sheets and information
General Attributes
The UV monitor DUV 11.3 in combination with various UV sensors is designed for monitoring UV radiation sources. Depending on a sensor type and device settings it is possible to visualize on the display either relative irradiation in percent or absolute irradiation in W/m². The absolute irradiation can be measured only with an UV sensor calibrated. In order to achieve high readability, an LCD rear-illuminated display is used.
TECHNICAL DATA
| Parameter | Value |
|---|---|
| Mass | Ca. 250 g |
| Dimensions (W x H x D) | 96 mm x 48 mm x 90 mm (incl. connection terminals) |
| Control board cut-out (W x H) | 92+0,6 mm x 48+0,6 mm |
| Supply voltage | 115 / 230 V AC, 50/60 Hz, max. 0,1 A |
| Inlets | 1 analogue input for connection of UV photodiodes; 1 analogue input 0…5 V DC for sensors with internal amplifier; 1 analogue input 4…20 mA (additional power supply is necessary); only one sensor can be connected simultaneously! |
| Outlets | 1 relay switching output with changeover contact, 230 V / 6 A, potential free; 1 analog output 4…20 mA |
| Working temperature range | 0 … 50 °C |
| Environmental conditions | Relative humidity < 90 % (no condensation or corrosive atmosphere) |